QR COVE GUIDES

QR code not scanning? Work through the real causes

You printed a QR code, pointed a phone at it, and nothing happened. Before you reprint a hundred copies, work through this list in order. Most "broken" QR codes are not broken at all — they are too small, too low-contrast, damaged, or being scanned the wrong way. Each cause below has a fix, and the fix is usually cheaper than a reprint.

First: the 30-second checks

Clean the camera lens. A smudged lens is the single most common reason a code "suddenly" stops scanning. Wipe it on a sleeve and try again.

Hold still, and let the camera focus. Point the camera, hold it steady for two seconds, and let autofocus settle. Waving the phone around never helps.

Try a second phone. If one phone scans it and another does not, the code is probably fine and the first phone is the problem — an old camera, a dirty lens, or a scanner setting. Test on the cheapest phone you can borrow, not just your own.

Check the light. Dim rooms, harsh glare on glossy paper, and deep shadow all defeat cameras. Move into even light, or tilt the paper so the glare moves off the code.

If none of that works, the code itself is the problem. Go down the list.

1. The code is too small for the distance

This is the number one real cause. A code that scans fine from 15 cm away will not scan from across a shop counter or a restaurant table. The rule of thumb: the code should be at least one-tenth of the scanning distance. Scanning from 1 metre away needs a code roughly 10 cm wide; from 30 cm, about 3 cm. A business-card code will never scan from a shop window. Fix: print bigger, or move the code closer to where people stand. Our print size estimator gives a starting size for your distance.

2. Not enough contrast

Scanners read dark squares on a light background. Light gray squares on white, yellow on white, or any pale color combination will fail, especially in poor light. Inverted codes — light squares on a dark background — fail on many phone cameras outright, because most scanners expect dark-on-light. Fix: use near-black squares on white or very pale paper. Save fancy colors for large, well-lit displays, and always test the exact color combination before printing.

3. The quiet zone is missing

Every QR code needs a blank margin around it — the "quiet zone" — at least four small squares wide on all sides. A code squeezed against text, a border, or the edge of a card can fail because the scanner cannot tell where the code ends. Fix: keep a clear white border around the code. If your design crowds it, add white padding and re-export.

4. The logo is too big

A small logo in the center is fine; QR codes have built-in error correction that can survive a little damage. A logo covering a quarter or more of the code is not fine — it eats the squares the scanner needs. Fix: shrink the logo to a small center mark, or drop it entirely on small prints. Test with the logo version on an older phone before committing.

5. The print is damaged, wrinkled, or glossy

Creases across the code, a coffee stain, a torn corner, or lamination glare can all break scanning. Curved surfaces are a special case: a code wrapped around a bottle or a cup distorts the squares, and flat-phone cameras struggle with the curve. Fix: reprint on flat, matte material. For curved packaging, print the code on a flat label or a hang tag instead of directly on the curve.

6. Too much data crammed in

A QR code holding a very long URL, a long message, or a full contact card packs its squares much tighter than a short link. Dense codes need to be printed bigger and scanned closer, and they fail first on cheap cameras. Fix: shorten what the code carries. Use a short link instead of a long one, and keep pre-filled messages brief. If you must carry a lot of data, print the code larger than you think you need.

7. The destination is dead — but the code is fine

Sometimes the scan works and then nothing useful happens: a "page not found," a deleted account, or a Wi-Fi password that changed. That is not a scanning failure; the code did its job and the destination let it down. This is also the one case where a static code cannot help you: a static code contains its destination directly, so if the destination moves, you print a new code. Read our guide on whether QR codes expire for the full picture.

8. The phone's QR scanning is off or the app is old

On iPhones, QR scanning lives in the Camera app and is on by default, but it can be switched off in Settings. On Android, it varies by maker — some camera apps scan, some need Google Lens, and some older phones need a separate scanner app. Fix: on iPhone, check Settings → Camera → Scan QR Codes. On Android, try Google Lens or a dedicated scanner app, and update the camera app if it is years out of date.

9. You are scanning a screen wrong

Codes on screens fail for screen-specific reasons: low brightness, a cracked screen protector, reflections, or the code being displayed too small. Fix: turn brightness up, zoom the code larger, and tilt the screen away from overhead lights. Screenshots of codes also lose sharpness when they are compressed by messaging apps — send the original PNG or SVG file instead of a screenshot of a screenshot.

10. The code was resized badly

Stretching a code wider than it is tall, or squashing a PNG down and back up, distorts the squares. A QR code must stay square, and it must stay sharp. Fix: always download the SVG for print and signage — it scales to any size without blur. Use PNG only at the size it was exported, or larger from the SVG.

How to test a code properly (before you print 500)

  1. Print one copy at the real size, on the real material.
  2. Scan it with two different phones, one of them old or cheap.
  3. Scan it from the real distance, in the real light, at the real location.
  4. Follow the link all the way: does the page load, the chat open, the Wi-Fi connect?
  5. Only then approve the full print run.

Five minutes of testing saves the cost and embarrassment of a full run of unscannable codes.

When to just regenerate

If the code is dense, damaged in the source file, or carries a wrong or dead destination, no amount of testing will save it. Regenerate it — shorter data, dark on light, small or no logo, proper quiet zone, SVG export — and test the new one. With QR Cove that costs nothing: make a fresh free QR code in under a minute, with no account and no watermark.

Frequently asked questions

Why won't my QR code scan?

The common causes are a code printed too small for its scanning distance, low contrast, a missing quiet zone, an oversized centre logo, print damage or glare, too much data packed into the pattern, a dead destination, or scanning being off on the phone. Work through the checks in this guide in order — most codes fail for one of the first three reasons.

How do I test a QR code before printing a lot of copies?

Print one copy at the real size, on the real material. Scan it with two different phones, one of them old or cheap, from the real distance, in the real light, at the real location. Follow the link all the way and check that the page loads or the chat opens. Only then approve the full print run.

When should I just regenerate the code?

If the code is dense, damaged in the source file, or carries a wrong or dead destination, no amount of testing will save it. Regenerate it with shorter data, dark modules on a light background, a small or no logo, a proper quiet zone and an SVG export — then test the new one.

Open the related tool →